Search
Close this search box.
05 Corvette LS2 Engine & 4 Speed Auto Trans Rolling Chassis 48k Miles

Shop for Parts Online

05 Corvette LS2 Engine & 4 Speed Auto Trans Rolling Chassis 48k Miles

$8,749.00

1 in stock

SKU 24-023 ENG Category

Description

 

CLEVELAND POWER & PERFORMANCE IS PROUD TO OFFER THIS COMPLETE ROLLING CHASSIS THAT WAS REMOVED FROM A 2005 CHEVY CORVETTE WITH ONLY 48K MILES ON IT! THIS CHASSIS FEATURES THE 6.0L LS2 ENGINE AND 4L60E 4 SPEED AUTO TRANSMISSION. THIS CHASSIS IS THE IDEAL PLATFROM FOR JUST ABOUT ANY RESTOMOD AS IT ALLOWS YOU TO SOURCE ALL MAJOR PARTS IN ONE PLACE!

 

THIS IS THE REAL DEAL! NO FILE PHOTOS USED HERE! WE ONLY ADVERTISE WHAT WE HAVE IN STOCK AND READY TO GO. WE VIN VERIFY EVERY PACKAGE WE SELL AND WE ARE HAPPY TO ANSWER ANY QUESTIONS YOU HAVE.

 

WE SHIP INTERNATIONAL AND DOMESTIC! PLEASE CONTACT US FOR A SHIPPING QUOTE!

 

THIS 6.0L LS2 ENGINE PRODUCES 400HP @6,000 RPM AND 400 LB-FT OF TORQUE @4,400 RPM.

 

THIS CHASSIS  WILL INCLUDE THE FOLLOWING:

6.0L LS2 ENGINE

4 SPEED AUTO TRANS

2.73 RATIO DIFFERENTIAL

TORQUE TUBE

AIR CLEANER

AIR FLOW METER

ENGINE HARNESS

ENGINE COMPUTER

TRANSMISSION HARNESS

INSIDE FUSE BOX

UNDER HOOD HARNESS

UNDERHOOD FUSE BOX

BODY CONTROL MODULE

ANTI LOCK BRAKE PUMP

IGNITION W/ KEY

PEDALS

SHIFTER

CALIPERS AND ROTORS

STEERING COLUMN

STEERING WHEEL

FRONT & REAR OEM SUSPENSION

LEFT & RIGHT FUEL TANKS

LEFT & RIGHT FUEL PUMPS

AFTERMARKET WHEELS

BRAKE LINES

FUEL LINES

 

HERE IS THE VIN FROM THIS CORVETTE – 1G1YY24U155122986

 

At Cleveland Power & Performance, each motor and transmission are inspected and run tested before we back them with our exclusive 6-month warranty! Before we start each engine, we remove the spark plugs and hand turn the engine over to make sure that no oil has passed the rings. We do a compression test to make sure the piston rings, intake valves, exhaust valves, and head gaskets are properly sealed. We do a vacuum test to make sure there are no burned or sticking intake and exhaust valves, collapsed lifters, or vacuum leaks. We do an oil pressure test at cold start up and warm operating temperature to ensure proper rod bearing clearance and that there are no restrictions in the oiling system. We do a CO test to make sure there are no cracks in the engine block and cylinder heads, and that there are no exhaust gases in the cooling system. We inspect the transmission by draining and inspecting the transmission fluid. We check for any debris or foreign material. If any problems are found, the transmission will be torn down for inspection and repaired as necessary.

 

 

Compression was 200 over 190
Oil pressure was 55 pounds cold and 40 pounds warm
Vacuum was a SOLID 20”
CO check PASS

 

HERE IS A VIDEO OF THIS ENGINE RUNNING IN THE CAR

 

Other Products