Search
Close this search box.
2012 Mustang GT 5.0L Coyote Engine 6 Speed Auto Trans TURN KEY Pallet 62k Miles

Shop for Parts Online

2012 Mustang GT 5.0L Coyote Engine 6 Speed Auto Trans TURN KEY Pallet 62k Miles

$8,495.00

1 in stock

SKU 24-002 ENG Category

Description

 

CLEVELAND POWER & PERFORMANCE IS PROUD TO OFFER THIS 2012 MUSTANG GT 5.0L COYOTE ENGINE & 6 SPEED AUTO TRANS TURN KEY DROPOUT. READY TO START AND RUN AFTER ADDING FLUIDS AND FUEL! THIS PACKAGE HAS 62k MILES ON IT!

 

WE SHIP INTERNATIONAL AND DOMESTIC! PLEASE CONTACT US FOR A SHIPPING QUOTE!

 

THIS 5.0L COYOTE ENGINE PRODUCES 420HP AND 390FT-LBS OF TORQUE!!!

 

THIS LISTING WILL INCLUDE THE FOLLOWING:

5.0L COYOTE ENGINE

6-SPEED AUTO TRANSMISSION

ENGINE ACCESSORIES

ENGINE HARNESS

ENGINE COMPUTER

ENGINE COMPARTMENT FUSE BOX

BODY CONTROL MODULE

ANTI-LOCK BRAKE PUMP AND MODULE

SPEEDOMETER

COLD AIR INTAKE

PEDAL ASSEMBLY

FUEL TANK W/ FUEL PUMPS AND FUEL PUMP DRIVER

SHIFTER

STEERING COLUMN

BODY HARNESS W/ DASH HARNESS AND BATTERY CABLES

 

HERE IS THE VIN FROM THIS MUSTANG: 1ZVBP8CF3C5242434

 

At Cleveland Power & Performance, each motor and transmission are inspected and run tested before we back them with our exclusive 6-month warranty! Before we start each engine, we remove all the spark plugs and hand turn the engine over to make sure no oil has passed the rings. We do a compression test to make sure the piston rings, exhaust valves, intake valves, and head gaskets are properly sealed. We do a vacuum test to make sure there are no burned or sticking exhaust and intake valves, collapsed lifters, or vacuum leaks. We do an oil pressure test at cold start up and warm operating temperatures to ensure proper rod bearing clearance and that there are no restrictions in the oiling system. We do a CO test to make sure there are no cracks in the engine block and cylinder heads, and that there are no exhaust gases present in the cooling system. We inspect the transmission by draining and inspecting the transmission fluid. We check for any debris or foreign material. If any problems are found, the transmission will be torn down for inspection and repaired as necessary.

 

Compression was 240 over 235

Oil pressure was 65 pounds cold and 50 pounds warm

Vacuum was a SOLID 22”

CO check PASS

 

 

HERE IS A VIDEO OF US RUNNING THIS ENGINE ON THE PALLET:

 

 

 

Other Products