2021 Ford F350 Super Duty 7.3L GODZILLA Engine & 10 Speed Auto Trans 4×4 TURN KEY PALLET – 73K MILES

Shop for Parts Online

2021 Ford F350 Super Duty 7.3L GODZILLA Engine & 10 Speed Auto Trans 4×4 TURN KEY PALLET – 73K MILES

$12,995.00

SKU 24-094 ENGINE Category

Description

CLEVELAND POWER & PERFORMANCE IS PROUD TO OFFER THIS 2021 FORD F350 SUPER DUTY 7.3L GODZILLA ENGINE WITH 10 SPEED AUTO TRANS AND 4×4 CAPABILITY TURN KEY DROPOUT. READY TO START AND RUN AFTER ADDING FLUIDS AND FUEL!! THIS PACKAGE HAS 73K MILES ON IT!

 

**THIS TURN KEY PACKAGE DOES NOT INCLUDE THE TRANSFER CASE**

**WE CAN REMOVE THE FUEL TANK TO SAVE ON SHIPPING COSTS IF YOU PREFER. PLEASE CONTACT US TO DISCUSS**

 

WE SHIP INTERNATIONAL AND DOMESTIC! PLEASE CONTACT US FOR A SHIPPING QUOTE!

 

THIS 7.3L ENGINE PRODUCES 430HP AND 485FT-LBS OF TORQUE!!!

 

THIS LISTING WILL INCLUDE THE FOLLOWING:

7.3L GODZILLA ENGINE

10R140 10 SPEED AUTO TRANSMISSION

ENGINE ACCESSORIES

ENGINE HARNESS

ENGINE COMPUTER

ENGINE COMPARTMENT FUSE BOX

BODY CONTROL MODULE

ANTI-LOCK BRAKE PUMP AND MODULE

SPEEDOMETER

PEDAL ASSEMBLY

FUEL TANK FROM FORD E450 CUTAWAY

FUEL PUMPS 

STEERING COLUMN WITH SHIFTER

AIR CLEANER

VIN MATCHED IGNITION WITH KEY

BODY HARNESS W/ DASH HARNESS AND BATTERY CABLES

 

HERE IS THE VIN FROM THIS F-350: 1FT8W3BNXPED33167

 

At Cleveland Power & Performance, each motor and transmission are inspected and run tested before we back them with our exclusive 6-month warranty! Before we start each engine, we remove all the spark plugs and hand turn the engine over to make sure no oil has passed the rings. We do a compression test to make sure the piston rings, exhaust valves, intake valves, and head gaskets are properly sealed. We do a vacuum test to make sure there are no burned or sticking exhaust and intake valves, collapsed lifters, or vacuum leaks. We do an oil pressure test at cold start up and warm operating temperatures to ensure proper rod bearing clearance and that there are no restrictions in the oiling system. We do a CO test to make sure there are no cracks in the engine block and cylinder heads, and that there are no exhaust gases present in the cooling system. We inspect the manual transmission by draining and inspecting the transmission fluid. We check for any debris or foreign material. If any problems are found, the transmission will be torn down for inspection and repaired as necessary.

 

Compression was 185 over 175

Oil pressure was 80 pounds cold and 65 pounds warm

Vacuum was a SOLID 23”

CO check PASS

 

HERE IS A VIDEO OF US RUNNING THIS ENGINE ON THE PALLET:

 

Other Products