2023 Durango Pursuit 5.7L HEMI Engine & 8 Speed Automatic Transmission AWD 45K MILES

Shop for Parts Online

2023 Durango Pursuit 5.7L HEMI Engine & 8 Speed Automatic Transmission AWD 45K MILES

$9,000.00

SKU 25-140 ENGINE Category

Description

CLEVELAND POWER & PERFORMANCE IS PROUD TO OFFER THIS 5.7L HEMI ENGINE WITH 8 SPEED AUTO TRANS & TRANSFER CASE TURN KEY DROPOUT. THIS PACKAGE WAS REMOVED FROM A 2023 DODGE DURANGO PURSUIT VEHICLE WITH ONLY 45K MILES ON IT! ADD FLUIDS AND SHES READY TO START AND RUN AS IT ARRIVES ON THE FREIGHT TRUCK!!

 

THIS IS THE REAL DEAL! NO FILE PHOTOS USED HERE! WE ONLY ADVERTISE WHAT WE HAVE IN STOCK AND READY TO GO. WE VIN VERIFY EVERY PACKAGE WE SELL AND WE ARE HAPPY TO ANSWER ANY QUESTIONS YOU HAVE. THERE MAY BE IMITATORS, BUT WE ARE THE HOME OF THE ORIGINAL TURNKEY PALLET!

 

WE SHIP INTERNATIONAL AND DOMESTIC! PLEASE CONTACT US FOR A SHIPPING QUOTE!

 

THIS 5.7L HEMI ENGINE PRODUCES 360 HP AND 390 FT-LBS OF TORQUE

 

THIS LISTING WILL INCLUDE THE FOLLOWING:

5.7L HEMI ENGINE

8HP70 8 SPEED AUTOMATIC TRANSMISSION

TWO SPEED ELECTRIC TRANSFER CASE

BELT DRIVEN ENGINE ACCESSORIES

ENGINE HARNESS

ENGINE COMPUTER

UNDER HOOD FUSE BOX

BODY CONTROL MODULE

ANTI-LOCK BRAKE UNIT

SPEEDOMETER

PEDAL ASSEMBLY

FUEL TANK WITH FUEL PUMP

COLUMN SHIFTER

PUSH START BUTTON WITH FOBS

DASH HARNESS

BODY HARNESS WITH BATTERY CABLES

CATALYTIC CONVERTERS W/ 02 SENSORS

 

HERE IS THE VIN FROM THIS DURANGO – 1C4SDJFT4PC628091

 

At Cleveland Power & Performance, each motor and transmission are inspected and run tested before we back them with our exclusive 6-month warranty! Before we start each engine, we remove the spark plugs and hand turn the engine over to make sure that no oil has passed the rings. We do a compression test to make sure the piston rings, intake valves, exhaust valves, and head gaskets are properly sealed. We do a vacuum test to make sure there are no burned or sticking intake and exhaust valves, collapsed lifters, or vacuum leaks. We do an oil pressure test at cold start up and warm operating temperature to ensure proper rod bearing clearance and that there are no restrictions in the oiling system. We do a CO test to make sure there are no cracks in the engine block and cylinder heads, and that there are no exhaust gases in the cooling system. We inspect the transmission by draining and inspecting the transmission fluid. We check for any debris or foreign material. If any problems are found, the transmission will be torn down for inspection and repaired as necessary.

 

Compression was 230 over 220  

Oil pressure was 55 pounds cold and 50 pounds warm

Vacuum was a SOLID 14”

CO check PASS

 

HERE IS A VIDEO OF US RUNNING THIS ENGINE ON THE PALLET:

 

 

Other Products