Search
Close this search box.
99 Camaro Z28 SS 5.7L LS1 Engine 4 Speed Auto Trans TURN KEY PALLET 60K

Shop for Parts Online

99 Camaro Z28 SS 5.7L LS1 Engine 4 Speed Auto Trans TURN KEY PALLET 60K

$6,250.00

1 in stock

SKU 24-060 ENG Category

Description

CLEVELAND POWER & PERFORMANCE IS PROUD TO OFFER THIS 5.7L LS1 ENGINE AND 4 SPEED AUTO TRANS TURN KEY DROPOUT. THIS PACKAGE WAS DROPPED OUT OF A 1999 CAMARO Z28 WITH 60K MILES ON IT! ADD FLUIDS AND SHES READY TO START AND RUN AS IT ARRIVES ON THE FREIGHT TRUCK!!

 

WE SHIP INTERNATIONAL AND DOMESTIC! PLEASE CONTACT US FOR A SHIPPING QUOTE!

 

THIS 5.7L LS1 ENGINE PRODUCES 325 HP @ 5,200 RPM AND 350 FT-LBS OF TORQUE @ 4,000 RPM

 

THIS LISTING WILL INCLUDE THE FOLLOWING:

5.7L LS1 ENGINE

4 SPEED AUTO TRANS

BELT DRIVEN ENGINE ACCESSORIES

ENGINE HARNESS

ENGINE COMPUTER

UNDER HOOD FUSE BOX

BODY CONTROL MODULE

SPEEDOMETER

PEDAL ASSEMBLY

FUEL TANK WITH FUEL PUMPS

SHIFTER

STEERING COLUMN

IGNITION WITH KEY

BODY HARNESS WITH BATTERY CABLES

 

HERE IS THE VIN FROM THIS CAMARO: 2G1FP22G1X2141592

 

At Cleveland Power & Performance, each motor and transmission are inspected and run tested before we back them with our exclusive 6-month warranty! Before we start each engine, we remove the spark plugs and hand turn the engine over to make sure that no oil has passed the rings. We do a compression test to make sure the piston rings, intake valves, exhaust valves, and head gaskets are properly sealed. We do a vacuum test to make sure there are no burned or sticking intake and exhaust valves, collapsed lifters, or vacuum leaks. We do an oil pressure test at cold start up and warm operating temperature to ensure proper rod bearing clearance and that there are no restrictions in the oiling system. We do a CO test to make sure there are no cracks in the engine block and cylinder heads, and that there are no exhaust gases in the cooling system. We inspect the transmission by draining and inspecting the transmission fluid. We check for any debris or foreign material. If any problems are found, the transmission will be torn down for inspection and repaired as necessary.

 

Compression was 185 OVER 170

Oil pressure was 55 pounds cold and 48 pounds warm

Vacuum was a SOLID 21”

CO check PASS

 

 

HERE IS A VIDEO OF US RUNNING THIS ENGINE ON THE PALLET:

 

Other Products