Search
Close this search box.
2016 Mustang Shelby GT350 5.2L Voodoo Engine & 6 Speed Manual Trans Turnkey 45k Miles

Shop for Parts Online

2016 Mustang Shelby GT350 5.2L Voodoo Engine & 6 Speed Manual Trans Turnkey 45k Miles

$18,250.00

1 in stock

SKU 24-047 ENG Category

Description

CLEVELAND POWER & PERFORMANCE IS PROUD TO OFFER THIS 2016 MUSTANG GT350 5.2L VOODOO ENGINE AND 6 SPEED MANUAL TRANS TURN KEY DROPOUT. READY TO START AND RUN AFTER ADDING FLUIDS AND FUEL! THIS PACKAGE HAS ONLY 45K MILES ON IT!

 

WE SHIP INTERNATIONAL AND DOMESTIC! PLEASE CONTACT US FOR A SHIPPING QUOTE!

 

THIS 5.2L VOODOO ENGINE PRODUCES 526HP AND 429FT-LBS OF TORQUE!!!

 

 

THIS TURNKEY WILL INCLUDE THE FOLLOWING:

5.2L VOODOO ENGINE

TREMEC TR-3160 MANUAL TRANS

ENGINE ACCESSORIES

ENGINE HARNESS

ENGINE COMPUTER

ENGINE COMPARTMENT FUSE BOX

BODY CONTROL MODULE

ANTI-LOCK BRAKE PUMP AND MODULE

OIL COOLER

 AIR CLEANER

SPEEDOMETER AND GAUGES

PEDAL ASSEMBLY

FUEL TANK W/ FUEL PUMPS AND FUEL PUMP DRIVER

SHIFTER

STEERING COLUMN

PUSH BUTTON IGNITION WITH KEYFOB

BODY HARNESS W/ DASH HARNESS AND BATTERY CABLES

CATS WITH 02’S

 

HERE IS THE VIN FROM THIS MUSTANG: 1FA6P8JZ9G5521013

 

At Cleveland Power & Performance, each motor and transmission are inspected and run tested before we back them with our exclusive 6-month warranty! Before we start each engine, we remove all the spark plugs and hand turn the engine over to make sure no oil has passed the rings. We do a compression test to make sure the piston rings, exhaust valves, intake valves, and head gaskets are properly sealed. We do a vacuum test to make sure there are no burned or sticking exhaust and intake valves, collapsed lifters, or vacuum leaks. We do an oil pressure test at cold start up and warm operating temperatures to ensure proper rod bearing clearance and that there are no restrictions in the oiling system. We do a CO test to make sure there are no cracks in the engine block and cylinder heads, and that there are no exhaust gases present in the cooling system. We inspect the transmission by draining and inspecting the transmission fluid. We check for any debris or foreign material. If any problems are found, the transmission will be torn down for inspection and repaired as necessary.

 

 

Compression was 235 over 215

Oil pressure was 75 pounds cold and 60 pounds warm

Vacuum was a SOLID 19”

CO check PASS

 

 

HERE IS A VIDEO OF US RUNNING THIS ENGINE ON THE PALLET

 

Other Products