2004 8.3L Engine 6 speed 15K Driving Donor Chassis 514RWHP

SOLD 2004 8.3L Engine 6 speed 15K Driving Donor Chassis 514RWHP – SOLD

Cleveland Power and Performance is proud to present this 2004 Dodge Viper SRT-10 run and drive donor car. This car is complete with interior, suspension, cooling, and 8.3L V10 Engine. Our customers have used these donors in everything from classic Mopar builds to modern custom kit cars. This Viper could also be a perfect transplant to repair your wrecked Vehicle. This Viper donor has ONLY 15,XXX actual miles on it!

CLICK THIS LINK TO SEE PHOTOS OF THE DONOR BUILD FROM START TO FINISH

This vehicle was involved in a front end collision. The Vehicle was put on our frame machine and the left hand rail was pulled to allow the suspension to be installed. There is a dent in the left hand rail where it meets the cowl, as pictured.

Please make sure to look at all of the pictures below, as well as in the link provided above.

This Viper has been tastefully modified with a Custom Ground Comp Cam. We took this Viper to our local Dyno shop to see how much power it is making. This viper put down 514rwhp and 510 ft-lbs of torque.

HERE ARE THE SPECS ON THE CAMSHAFT

Serial # Z 9424-12 Spec Card# 21182812
Part # 111-000-10 CAMSHAFT, VIP3 2003& UP VIPER/TRUCK SPCL
Core C111-10 CAMSHAFT BLANK, VIP3 CHRY V10/TRUCK 3BLT
Grind # VIP3 3655 /3656 HR114.0
DURATION @ .050 INTAKE 244 ROCKER ARM RATIO
VALVE ADJ INTAKE .000 DURATION @ .050 EXHAUST 246 INTAKE 1.60
VALVE ADJ EXHAUST .000 LOBE LIFT INTAKE .3510 EXHAUST 1.60
VALVE LIFT INTAKE .561 LOBE LIFT EXHAUST .3510
VALVE LIFT EXHAUST .561 LOBE SEPARATION 114.0
DURATION .006 INTAKE C/L 114.0
TAPPET LIFT INTAKE 297 CAM ADVANCE 0
TAPPET LIFT EXHAUST 299 HYDRAULIC Y
VALVE TIMING .050 OVERHEAD CAM N
VALVE OPEN INTAKE 8 JOURNAL DIAMETER STD 2.090
VALVE OPEN EXHAUST 57 RECOMMENDED VALVE SPRINGS
VALVE CLOSED INTAKE 56 DEPARTMENT P
VALVE CLOSED EXHAUST 9 SPC INSTR FOR CUSTOMER

WE SPEC’D THIS ENGINE OUT TO INSURE THAT SHE WAS RUNNING SMOOTHLY

Oil pressure at cold start up is 55 pounds

Oil pressure at warm operating temperature is 40 pounds

Vacuum draw was 10″ 

Compression is 205 over 195  :

1-195 2-200 3-200 4-205 5-195 6-200 7-195 8-205 9-205 10-200

CO check PASSED

8.3L V10 Engine with custom ground comp cam putting down 514rwhp and 510ft-lbs of torque

Complete OEM dash, digital speedometer, radio, heater controls, and everything as pictured.

OEM Viper Black leather and suede seats and complete interior as pictured. The interior shows signs of normal use, as pictured. The drivers seat track has been modified to sit lower in the car, allowing for a taller driver to comfortably operate the vehicle. Please see the pictures at the bottom of the auction.

The fuel tank assembly w/ pump including the charcoal canister

Complete OEM exhaust system with mufflers

OEM 3.07 ratio differential

OEM T-56 6 speed manual transmission

Complete cooling w radiator, cooling fan, and condenser

Complete front and rear suspensions with shocks, brakes, and more.

OEM Viper wheels on Michelin Pilot Sport tires. The front are size 275/35/18 and the rears are 345/30/19.

CHECK THE EXPORT LAWS TO SEE IF YOU CAN GET THIS VEHICLE INTO YOUR COUNTRY

WE HAVE A CUSTOM ENCLOSED DELIVERY TRAILER TO BRING THIS VIPER TO YOUR LOCATION! CONTACT US FOR A QUOTE!!